iOS 5.1.1 Jailbreak

Running iOS 5.1.1 iPod touch 4G is very easy to jailbreak now. iPhone Dev Team has released Redsn0w version of 0.9.14b2 for jailbreak any iDevices running iOS 5.1.1. The main thing is they have released both Windows and Mac version of it. So now, not only Windows users, but also Mac users can be jailbroken their iPod touch 4G within few steps with using RedsnOw 0.9.14b2 versions.

If you are a Windows user, you can get the step guide to jailbreak your iPod touch 4G with RedsnOw 0.9.14b2 by clicking here.

Here is the user guide to Jailbreak iPod touch 4G iOS 5.1.1 using RedsnOw 0.9.14b2 for Mac users.

 Step 01

Download latest version of RedsnOw 0.9.14b2  Mac version. it will be downloaded as a zip file. Extract it to the same place.

Step 02

Run RedsnOw 0.9.14b2 exe file.

Step 03

Before the start the jailbreak, put your iPod touch into DFU mode by following below steps.

• Hold Power button for nearly 5 seconds.
• Press Home button also, without releasing the Power button for another 10 seconds.
• Release Power button, while pressing Home button for nearly 15 seconds, moreover.

Step 04

See below screen shot. When you put your iPod touch 4G into DFU mode, there will be a message “Connected:iOS devices (DFU mode)” bottom of the screen shot. Now you can start the jailbreak by clicking “Jailbreak” button.

Step 05

When you click on the “Jailbreak” button, RedsnOw 0.9.14b2 will be preparing to start the untethered jailbreak for your iPod touch 4G.

Step 06

In this step, you have to choose “Install Cydia” and click on the “Next” button.

Step 07

RedsnOw 0.9.14b2 unthethered version is now starting the jailbreak. After completed it, iPod touch 4G will be reboot it’s own.

After complete the reboot, go to SpringBoard with “Slide to Unlock”. If there will be a Cydia icon, you have successfully completed jailbreak your iPod touch 4G with RedsnOw 0.9.14b2 version.

Now it is very easy to download and install Cydia by jailbreaking iPhone 4 iOS 5.1.1 using RedsnOw 0.9.14b2 tool both Windows and Mac users. iPhone Dev Team has released RedsnOw 0.9.14b2 version both Windows and Mac version as untethered just for free. If you are a Mac user, please refer jailbreak iPhone 4 iOS 5.1.1 using RedsnOw 0.9.14b2 (Mac) post. In this content, I’m going to give the step guide to jailbreak your iPhone 4 using RedsnOw 0.9.14b2 version for Windows users only.

The main thing is, Windows users want to run RedsnOw 0.9.14b2 exe file as Administrator. Any how, below has the step guide to jailbreak your iPhone 4 to download and install Cydia just for free.  Please follow this step guide, after reading three or four time, before start the Jailbreak.

Step guide of Jailbreak iPhone 4 iOS 5.1.1 using RedsnOw 0.9.14b2 for Windows users.

Step 01

On your PC’s desktop, create a folder as “Pwnage”. Download RedsnOw 0.9.14b2 Windows version into this folder and extract it to the same folder.

Step 02

Run iTunes. Make sure to run latest version of iTunes.

From the devices list on the left, you must select your’s iPhone 4.

In this step, you have to chance to update your iPhone 4 up to 5.1.1. Go to “Pwnage” folder in the iTunes. Then select 5.1.1 IPSW file. to update firmware click on the Choose button.

Step 03

Go to “Pwnage” folder and run RedsnOw 0.9.14b2 exe file, we extract earlier. Make sure to run it as administrator. Choose the option of “Run as Administrator” by clicking the right mouse button on the exe file.

Step 04

Click on the “Jailbreak” button. Then it will be started the jailbreaking.

Now there will be a message to ask to choose the DFU ramdisk method or the backup/restore method. At this stage, click on the “Yes” button to choose DFU ramdisk method.

Step 05

Plug your iPhone 4 into PC. Then turn off it. Please do as the below screen shot’s instructions. Then click on the “Next” button.

Step 06

You will be entered into DFU mode.

Please follow the instructions which you give by the below screen shot. There will be completed within three steps into DFU mode.

Step 07

iPhone 4 will be reboot.

Step 08

The jailbreaking data will be prepared.

Step 09

Check, on the “Install Cydia” and then click “Next” button.

Step 10

iPhone 4 will rebooting again. After finished the reboot, the RAM disk and Kernel will be started to upload by Redsn0w.

Step 11

After finished all the steps above, there will be a message as “Done”. Within nearly 5 minutes, iPhone will be finished rebooting. Then go to iPhone’s SpringBoard. There will be the icon of Cydia. It means, you have downloaded Cydia for iOS 5.1.1 with jailbreaking your iPhone 4 with RedsnOw 0.9.14b2 .

Now, it is very easy to jailbreak your iPhone 4 iOS 5.1.1 using RedsnOw 0.9.12b1 untethered version. RedsnOw is the easiest way to jailbreak your’s any iDevices without any difficulties. RedsnOw 0.9.12b1 version has released both Windows and Mac users. One of the previous article was given how to jailbreak iPhone 4 iOS 5.1.1 using RedsnOw 0.9.12b1 for Windows users. Now I’m going to give the step guide to jailbreak iPhone 4 iOS 5.1.1 using RedsnOw 0.9.12b1 for Mac users. Please follow below user guide to download and install Cydia for your iPhone 4.

Step guide

Step 01

First of all, download the RedsnOw 0.9.12b1 Mac’s version to your desktop. Extract the RedsnOw 0.9.12b1 zip file to the same place.

Step 02

Run RedsnOw 0.9.12b1 exe file, which we extract in the first step.

Step 03

Please follow below three steps to put your iPhone 4 into DFU mode.

• Hold the Power button for 5 seconds.
• Press and hold Home button as well, without release Power button for 10 seconds.
• Now release Power button while holding Home button for another 15 seconds.

Step 04

See below screen shot. You can see bottom of the screen shot that Connected iDevice. Click on the “Jailbreak” button to start the jailbreak.

Step 05

See below screen shot. There will be preparing the jailbreak.

Step 06

After completed the preparing, you will have to choose “Install Cydia” option. Then click on the “Next” button.

Step 07

Jailbreaking will be started. After completed it, your iPhone 4 will be reboot automatically.( RedsnOw 0.9.12b1 as an untethered version)

Now you can go with “Slide to Unlock” into your’s iPhone 4 SpringBoard. See, there will be a Cydia icon. You have successfully completed jailbreak with RedsnOw 0.9.12b1 untethered version to download and install Cydia for your iPhone 4.

Download and install Cydia for your iPod touch 4G is now easy with Redsn0w. iPhone Dev Team has released new version of RedsnOw 0.9.12b1 as untethered. This tool is available both, Windows and Mac users. In this content, I’m going to give the step guide, that how to jailbreak iPod touch 4G iOS 5.1.1 using RedsnOw 0.9.12b1 for Windows users only. If you are a Mac user, please follow our Mac user guide.

Jailbreak iPod touch 4G with iOS 5.1.1 using RedsnOw 0.9.12b1 (Windows) user guide.

01. On your PC’s desktop, create a folder as “Pwnage” to download Windows version of RedsnOw 0.9.12b1. it will be a zip folder. Extract it to “Pwnage” folder as well.

02. Run iTunes. Make sure to run latest version of iTunes.

Now you have to chance to select, which device you are going to jailbreak, from the devices list.

If you have any idea to update iPod touch firmware, click on “Choose” button.

03. Run RedsnOw 0.9.12b1.exe file, which we extracted earlier into “Pwnage” folder. Windows users want to run this file as Administrator. Choose “Run as Adminstrator” by right mouse clicking on the exe file.

04. To process jailbreak, click on the “Jailbreak” button.

To choose DFU ramdisk method, click on the “Yes” button.

05. Follow instructions, which you are given below by the screen shot.

06. See below screen shot as well. Please follow instruction, which you give from the screen shot to put iPod touch 4G into DFU mode. It will take only three steps to complete.

07. Then iPod touch 4G is rebooting.

08. Jailbreaking data will be prepared.

09. To install Cydia, select “Install Cydia” from the list. Then go to head by clicking “Next” button.

10. Now rebooting your iPod touch 4G with RAM disk and Kernel.

11. There will be a message as “Done”. Another few seconds, iPod touch will rebooting. After completing the reboot, go to SpringBoard. There will be an icon of Cydia. It means you have completed successfully download and install Cydia for your iPod touch 4G with RedsnOw 0.9.12b1 Windows version.

We were waiting for long time to download and install Cydia for iPad 2 running iOS 5.1.1. Now we are able to jailbreak iPad 2 also using RedsnOw 0.9.12b1. RedsnOw 0.9.12b1 version available both Mac and Windows users. iPhone Dev Team has introduced this both versions as untethered. Now i’m going to give the step guide how to jailbreak iPad 2 iOS 5.1.1 using RedsnOw 0.9.12b1 for Mac users.

Step guide.

01. Create a folder called “Pwnage” on your’s Mac’s desktop. Download Redsn0w latest version into that folder. Then extract the Redsn0w zip file to the same folder.

02. Run latest iTunes. Connect your’s iPad 2 into Mac PC.

In this step, you must select iPad 2 from the devices list of the left.

If you have any idea to upgrade your’s iPad 2 upto iOS 5.1.1, click on the “Choose” button. Then it will be updated. Other wise skip this step.

03. Run Redsn0w 0.9.12b1 exe file, we extracted earlier.

04. Click on the “Jailbreak” button to start jailbreak.

05. The Rocky Racoon jailbreak will be completed within three steps. Those are Preparing, Processing and Finishing up.

Preparing

Processing

Finishing up

06. There will be a message “ Jailbreak was successfully installed”.

Even if it is given the message, jailbreak is not complete yet. Please wait another few minutes until rebooting iPad 2 its own. Then you can see below screen shot.

Now you have completed the jailbreaking. See your’s iPad 2 SpringBoard. There will be Cydia icon. So now you can enjoy with Cydia apps.

There is a good news for Mac users. If you have iPhone 4S running iOS 5.1.1, you also can download and install Cydia with jailbreaking. This article is only for Mac users. If you are a Windows user, please follow our Jailbreak iPhone 4S iOS 5.1.1(Windows) article.

Now you know that, there are two versions for jailbreaking your iPhone 4S. Both tools have been introduced as untethered versions by the developers of those tools.

1. Redsn0w 0.9.12b1
2. Absinthe 2.0.4

Redsn0w 0.9.12b1

iPhone Dev Team has given this tool for jailbreaking your’s any iDevices running iOS 5.1.1 with easily. Actually, this is the easier tool to jailbreak iDevices than ever. Specially for iPhone 4S, iPad 2 and iPad 3. Reason is, those three iDevices don’t want to put DFU mode by manually. Other devices instead these three, we want to put DFU mode by manually. It also not difficult to do. So below has the step guide how to jailbreak iPhone 4S iOS 5.1.1 for Mac’s user?

Step 01

Create a folder as Pwnage on your’s Mac’s desktop to download Redsn0w latest version of 0.9.12b1. It will be downloaded as Zip folder. Then you want to Extract it to the same folder.

Step 02

Connect iPhone 4S with the Mac via USB cable and then run latest iTunes.

At this stage, you want to select the device which you want to jailbreak, by the list on the left. I selected my iPhone 4S.

If you want to update your iPhone 4S firmware up to 5.1.1, click on the “Choose” button. Then it will update.

Step 03

Run Redsn0w exe file which you extract earlier.

Step 04

Click on the “jailbreak” button to continue jailbreak.

Step 05

With in three steps, the Rocky Racoon jailbreak will be completed.

Preparing.

Processing

Finishing up

Step 06

See below screen shot. After completed jailbreak, you can see this screen shot.

Please wait for another few moments. Now you know your’s iPhone 4S, iPad 2 and iPad 3 will automatically rebooting after complete jailbreaking. At this moment, it will happened.   Then there will be another message that, “Jailbreak is the success”.

Now see the SpringBoard. There will be a Cydia icon. If you can see Cydia icon on your’s iPhone 4S home screen, it means you have completed jailbreak with Redsn0w version. Now you can work with Cydia.

Absinthe 2.0.4

The Chronic Dev Team has given you this tool to jailbreak your’s iDevices running iOS 5.1.1. This tool also has two versions for both Windows and Mac users.

Now you know that, you can download Cydia for your’s iPad 3 running iOS 5.1.1 is easy. There are two tools for jailbreak iPad 3 as untethered version. Because of these tools, jailbreak iPad 3 iOS 5.1.1 is not a dream. One of the previous article we talked about how to jailbreak iPad 3 iOS for Windows users. In this content, we are going to talk about how to jailbreak iPad 3 iOS 5.1.1 for Mac users. Here are the both tools.

1. Redsn0w 0.9.12b1
2. Absinthe 2.0.4

Redsn0w 0.9.12b1

This tool is the easier for jailbreaking your iPad 3 than Absinthe 2.0.4 tool. Lots of new features have been introduced via Redsn0w 0.9.12b1 tool by iPhone Dev Team. As a main feature, we can identify that, no need to put DFU mode when you jailbreak not only iPad 3 but also iPad 2 and iPhone 4S. It will be auto complete. Other iDevices, instead these three, want to put DFU mode manually.

Here is the step guide, how to jailbreak iPad 3 iOS 5.1.1 using Redsn0w 0.9.12b1 for Mac’s user.

Step guide.

Step 01

On your’s Mac’s desktop creates a folder as Pwnage. Then download the Redsn0w latest version in to the Pwnage folder. It will download as Zip folder. Extract it to the same folder.

Step 02

Connect your’s iPad 3 into the Mac and run iTunes.

Now select the iPad 3 from the devices list of the left.

If you want to update your iPad 3 firmware up to new, please click on the “Choose” button to continue. Then iPad 3 will update.

Step 03

Run Redsn0w.

Step 04

To start the jailbreak click on the “Jailbreak” button.

Step 05

The Rocky Racoon jailbreak will complete with three steps.

1. Preparing.

Step 06

There will be a message after complete jailbreak.

After complete jailbreaking please wait untill finish rebooting. Then there will be a message jailbreak is the success.

Check your’s iPad 3 SpringBoard. There will be Cydia icon. It means you have completely completed jailbreaking iPad 3 with Redsnow version. Enjoy with Cydia.

Absinthe 2.0.4

This tool has been released by chronic Dev Team as untethered version for jailbreaking your’s all iDevices running iOS 5.1.1. Absinthe 2.0.4 also have two versions for both Windows and Mac users.

Moreover, gets Cydia for your iPad 3 running iOS 5.1.1 is not a dream. Now you can jailbreak iPad 3 iOS 5.1.1 with easily. There are available two versions for jailbreak iPad 3 iOS 5.1.1. without any difficulties.

1. Redsn0w 0.9.12b1
2. Absinthe 2.0.4

Jailbreak iPad 3 iOS 5.1.1 is easy with Redsn0w 0.9.12b1 than Absinthe 2.0.4 tool. Becouse of iPhone Dev Team has introduced many newer features via Redsn0w 0.9.12b1 tool specially for iPad 3, iPad 2 and iPhone 4S. These three iDevices don’t want to put DFU mode. It will be auto complete. We want to put other iDevices, DFU mode manually.

First of all, I like to expalin step by step, how to get Cydia for your iPad 3 with using Redsn0w 0.9.12b1 tool for Windows users. If you are a Mac user, you can get all the details that how to jailbreak iPad 3 iOS 5.1.1 using Redsn0w 0.9.12b1 (Mac user).

Here is the step guide.

01.Downlad Redsn0w 0.9.12b1 windows version.

I created a folder on my desktop as Pwnage to download the zip file of Redsn0w. Then i extracted it. See below screen shot.

 02. Connect your iPad 3 with your PC and open iTunes.

Select your iPad 3 from the listed of devices on the left side. Then iTunes automatically check for update your iPad 3.

If you want to update, please click on the choose button to continue. Then iPad 3 will be updated.

03. Run Redsnow.exe file as administrator. To do that, right click your mouse on the redsnow file and select “Run as administrator”.

04. Clcik on the Jailbreak button to start jailbreak your iPad.

05. Within three steps, Rocky Racoon will complete the jailbreak.

Preparing.

Processing.

Finishing up.

06. Now Redsnow will give you message “Jailbreak was successfully installed”. After finish rebooting iPad 3 its own, jailbreak will be completed.

Now Cydia icon is available on the SpringBaord. You can enjoy with Cydia.

Jailbreak iPad 2 with iOS 5.1.1 for Windows users is now very easy because of the new version ofRedsn0w 0.9.12b1. iPhone Dev team has introduced easiest way to jailbreak youriPad 2. So now you can get Cydia for your iPad 2 as well. iPad 2 is a second generation one. It is also running iOS 5.1.1. It has Apple A5 processor. Even if you can’t get calls over cellular network, users can make a call over Wi-Fi using wired headset or built-in speaker and microphone. iPad 2 comes with Photo Booth application, which can take photos, and you can add effects to them.

Even if the Apple store gives you many more features, you waited, can we get Cydia for our iPad 2 as well. Now you can get Cydia easily with jailbreaking your iPad 2 with the Redsn0w 0.9.12b1 new version. iPad 2 also no need to put DFU mode to reboot. Redsn0w 0.9.12b1 new version supports for iPhone 4S, iPad 2 and iPad 3 super easy. Those three iDevices don’t need to put DFU mode. Those devices reboot its own.

It is very easy to Jailbreak iPad 2 with iOS 5.1.1, Redsn0w 0.9.12b1 latest version. Below has the step guide.

Important-

Before starting jailbreak make sure to complete these things. Check your iDevice running iOS 5.1.1. or not. (go to Settings — > General — > About — > version should be 5.1.1.) then get your iPad 2 backup. Please use iTunes latest version.

Please follow this step guide to Jailbreak iPad 2 iOS 5.1.1 using RedsnOw 0.9.12b1 (Windows). If you are a Mac user, please follow Jailbreak iPad 2 iOS 5.1.1 using RedsnOw 0.9.12b1 (Mac) for jailbreaking your iPad 2. Below step guide only for Windows users.

01. Download latest version of Redsn0w 0.9.12b1 to PC desktop. I downloaded it Pwnage folder, which i created on my desktop. It will be download as a Zip file. Then extract it to the same folder. Here is the screen shot.

02. Run iTunes, with connecting your iPad 2 to the PC.

Selected which devices want to jailbreak from the list of devices on the left.

If you have any idea to upgrade your iPad 2 upto iOS 5.1.1, you can do it in this stage , by clicking “Choose” button. After clicking Choose button, it will continue automatically.

03. Run Redsn0w 0.9.12b1 exe file, which you extracted earlier in to the Pwnage folder. Make sure to run Redsn0w exe file as Administrator. To do that right click on the Redsn0w file and choose “Run as an Administrator”. Becouse of you are a Windows user.

04. Redsn0w is running now. Click on the “Jailbreak” button to start the jailbreaking.

05. Latest version of Redsn0w will complete with three steps. Those are Preparing, Processing and Finishing up.

Preparing.

Processing.

Finishing up.

06. After complete those steps, there will be a message “Jailbreak was successfully installed”. Please be wait until your iPad 2 reboot its own. Now jailbreaking has successfully completed. You can see the icon of Cydia available on the Home screen.

Now enjoy with Cydia.